|
|
| Precision T-Rules |
"INCRA scores again with its precision steel rule.
Select the proper slot or hole, insert a .5mm
mechanical pencil, and mark the measurement
with dead-on accuracy."
Dave Henderson, Wood Magazine
|
-
Micro-fine guide holes and slots at every 1/16", 1/32" and 1/64" scale position instantly locate your sharp pencil or
scribe at the exact measurement with zero uncertainty and no eye strain!
- With the pencil in a marking hole, slide along any
edge to draw perfectly placed horizontal lines.
- Or use as a precision T-Square to draw perpendicular
lines.
- T-bar adjusts for making vertical
measurements.
Go to Precision Bend Rule
|
|
