10" Contractor-Style Tablesaw
- Convenient rail mounted on-off switch
- Extruded aluminum front guide rail allows 30" rip to the right and 12" to the left
- Exclusive design JETFENCE, a quick release precision T-square type rip fence
- Under-cabinet dust collection hood includes a 4" diameter hookup
- Completely prewired and includes a unique quick-connect motor-to-switch plug for easy setup
- Totally enclosed fan cooled motor includes overload protection and is UL listed
- Finish ground, heavy-duty cast iron table with T-style mitre gauge slots and beveled front edge
- Deluxe mitre gauge includes an extra long bar for larger cross cutting capacity
- Extra heavy-duty trunnions support a cast iron blade arbor housing featuring two precision ball bearings
- Forged one-piece precision ground arbor allows minimal blade runout
10"
Contractor-Style Tablesaw With 30" XACTA
Fence
Stock
No. 708307K
Same features as noted for the JWTS-10JF except for the following:
- Standard fence and rails are replaced by a XACTA FENCE 30" Homeshop fence
- Includes a 27" x 24" accessory wood table
- Overall table size 41" x 58" x 42"
- Rip capacity: 30" right, 12" left
10"
Contractor-Style Tablesaw With 52" XACTA
Fence -
Stock
No. 708308K
Same features as noted for the JWTS-10JF except for the following:
- Standard fence and rails are replaced by a XACTA FENCE 52" Homeshop
- Rip capacity, 52" right, 12" left
- Overall table size 41" x 82" x 42"
- 27" x 46" accessory wood table and support legs
| Stock Number: | 708301K |
| Model: | JWTS-10JF |
| Blade Diameter (in): | 10 |
| Arbor Diameter (in): | 5/8 |
| Max Depth of Cut (in): | 3 1/8 |
| Max Rip Right of Blade (in): | 30 |
| Max Rip Left of Blade (in): | 12 |
| Max Cut Depth at 45¡ (in): | 2 1/8 |
| Table in Front of Saw Blade at Max Cut (in): | 11 1/4 |
| Max Width of Dado (in): | 13/16 |
| Max Dado Diameter 8 Table Height (in): | 34 3/8 |
| Table Size (w/Ext/in)*: | 27D x 40W |
| Table Size (w/o Ext/in): | 27D x 20W |
| Overall Dia (HxWxD/in): | 41 x 57 1/2 x 42 |
| Arbor Speed (RPM): | 4,000 |
| Motor (TEFC): | 1 1/2 HP, 1 Ph 115/230V Prewired 115V |
| Net Weight (lbs): | 260 |
| *Without optional extensions listed | |
JET 10" Contractor-Style Tablesaw
Standard Equipment
- Mitre gauge with positive stops
- See-through blade guard with splitter and anti-kick pawls
- Extension wings, stamped steel
- Open-style steel stand
- Dust collection hood, 4"
- Push stick
- Blade not included
|
708307K - Shown with optional legs |
|
708308K |
